Loewe Auro 2216 PS - Manual (Page 11)

11 -
First installation
Switching on for the first time
Power mains
Connect the TV set to a 220-240V/50- 60 hertz power outlet.
Note: First, read section ”About operation” on pg. 15/16 to find out about the
basic operation of Auro.
Press the button on the front of the device
or
set the remote control to DVD-Preceiver mode and switch on
DVD/CD
or
press the button on the remote control briefly and switch on
radio.
Auro is switched on, DVD/CD appears in the display. This indicates that the
DVD/CD sub-unit is switched on.
Shortly afterwards, the message READING appears in the display. Now Auro
tries to read the disc in the drive. NO DISC appears in the display if there is
no disc in the drive.
Setting the language
First, set the desired language for the Auro menus. English is the default. Pro-
ceed as follows to set the language of your choice:
There is no disc in the drive and the drawer is closed.
Press the button.
The DVD menu is displayed.
DVD menu
Back
End
Info
Play from
Markers
Settings
Language Presettings
Sound
Go with 6 to the item “Language Presettings“.
Press 4.
The “Language Presettings“ window opens:
DVD menu
Languages Presettings
Back
End
Info
Subtitle active yes no
Subtitle English
Film English
Menu on DVD English
DVD Player Menu
Go with 6 to the item “DVD Player menu”.
Press 4.
The “Language DVD Player Menu“ window opens:
DVD menu
Language DVD Player menu
Back
Ende
Info
Deutsch D
English GB
Español E
Français F
Nederlands NL
Italiano I
Go with 65 to the language of your choise.