Loewe Auro 2216 PS - Manual (Page 10)

- 10
PREOUT
L C R L L
SL LFE SR R R
TO TV
AUX1 IN
DIGITAL
IN
DIGITAL
OUT TV
L-LINK 12V / 15mA
EXT
AUX OUT AUX 2
ON
OFF
Satellite Speaker OUT Surr
.
Fr
on
t
R R L C L
Loewe
Auro
COMPONENT VIDEO OUT
Y
Pb
Pr
PRE IN
L SL SR R C LFE
L SL SR R C FLE
First installation
Wiring Auro – audio system
Connect the cables as shown in the graphic:
Use a six-wire cinch cable to connect the PRE OUT outputs of the Auro to the
corresponding inputs of the active 5.1 loudspeaker system.
You can connect an additional external analogue source to the analogue audio
input AUX 1 IN.
Set the loudspeaker system to Auro as described on page 13.
Set the limit frequency for the bass speaker on your active 5.1 loudspeaker
system to at least 100 Hz. •
•
•
•
Remote control
Inserting the batteries
To insert or change the batteries, press on the point indicated by an imprinted
arrow. Push the battery compartment cover down and remove it. Insert batteries
of the alkaline-manganese LR 03 (AAA) type and make sure the + and – poles
are the right way round.
Then push the cover back on from below.
Note on disposing batteries
The batteries provided contain no harmful materials such as
cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries
may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated
collection containers set up at commercial businesses. You can
dispose used batteries also at your dealer.
e.g. MP3 Player
Satellite loudspeakers
Aktive 5.1 loudspeaker system
e.g. Loewe Individual Sound/Tremo