LG LHX-557 - Manual (Page 31)

31
Operation
10. Use V to choose the SPEED option.
Use b/B to choose the desired recording
speed (AUTO, SP or SLP).
AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to
complete recording the program. There will be
some picture and sound distortion at the point of
the speed change.
11. Use V to choose the REPEAT option.
Use b/B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on
a certain day of every week.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
Tip:
If the input data is wrong, use v to select the data and
correct it using b/B.
12. Press MENU, the program will be memorized
by the Home Theater System.
indicator lights in the display window.
If the program preset time has past, the PAST
TIME PROGRAMMED message will appear on the
TV screen. Return to the incorrect program and
program it with the correct time.
If you had entered a past date, timer recording will
be performed on that date of the next year.
Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings
only on the converter box output channel. This is
because the converter determines what channel you
view through your Home Theater System.
Tip:
If you are finished programming and you want to set the
Home Theater System to record the programs you have
entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
HOME THEATER SYSTEM. The Home Theater System is
now set to record the preset programs.
After setting up a timer recording, recording will start if no
other timer recordings overlap the start time, see next
column.
Notes:
• If the power fails or the Home Theater System is
unplugged from the AC outlet, the correct clock time and
timer settings are kept in memory for approximately 3
seconds. After 3 seconds, the clock and program timer
must be reset when power is restored. Reset the clock
according to instructions.
• After timer recording is completed, the Home Theater
System will turn off automatically.
• To watch a TV program while timer recording is in progress,
select Tuner mode by pressing TV/VCR repeatedly.
• If you wish to stop timer recording which has already started,
press STOP or POWER twice.
Checking (Erasing) Timer Record
Programming
Programming can be checked whenever the Home
Theater System is turned on.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to choose the PROGRAM menu.
Press MEMORY/ENTER and the PROGRAM menu
will appear.
3. Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4. Press MENU to return to the TV screen.
Program Priority
If the recording start and end times of preset
programs overlap on the same day (see the example
and diagram left), program number 2 will not be
recorded until program
number 1 is finished.
The first part of program
number 2 will not be
recorded. The same thing
will happen to program
number 3.
MAY
8
MAY
8