LG LHX-557 - Manual (Page 22)

22
VCR Setup Menu Options
1. Press MENU and the MAIN menu will appear.
2. Use v/V to select the SETUP menu, then press
MEMORY/ENTER.
The SETUP menu will appear.
3. Use v/V to choose a desired option on the SETUP
menu. Then use b/B to choose a desired setting.
FUNCTION OSD
The on-screen display of this Combi Receiver can be turned on
or off.
FUNCTION OSD: Choose ON and OFF with b/B.
LANGUAGE SELECT
The on-screen programming of this Combi Receiver can be
displayed in either English, Spanish, or French.
LANGUAGE SELECT: Choose ENGLISH, SPANISH, or
FRENCH with b/B.
AUDIO MODE
The Home Theater System has two separate audio playback
systems, the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system plays on
separate (left and right) channels, and the NORMAL system
plays monaural sound. The normal track is always played so
the cassette can be played on a Combi Receiver that does
not have VHS Hi-Fi.
AUDIO MODE: Choose Hi-Fi or NORMAL with b/B.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display
to the desired position when both MTS stereo and SAP signals
are received. When only one of the MTS signal is received, the
Combi Receiver automatically selects the corresponding
receiving mode (Stereo or SAP) regardless of the selected
position. For normal operation, the display should be in the
STEREO position. The Combi Receiver will then record a
STEREO program when available, and record a mono program
IF the program is NOT IN STEREO.
For weak STEREO and/or SAP broadcasts, changing the
display to mono may give clearer sound.
BROADCAST TYPE: Choose STEREO, SAP, or MONO
with b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL)
is in HI-FI position] for selecting the audio output signals
from the AUDIO OUT terminals (L ch and R ch), and
RF.OUT.
This display setting should normally be left in the stereo
position, so that when a stereo tape is played, the stereo
sound will be heard through the left and right channels. If a
mono tape is played and the audio output is set to stereo,
the same mono sound will be heard from both left and right
channels.
AUDIO OUTPUT: Choose STEREO, LEFT, or RIGHT with
b
/B.
POWER SAVE MODE
Set POWER SAVE MODE to ON to your Home Theater
System into an economic power saving mode.
The display turns off when the unit is in standby mode.
4. Press MENU when finished.
Channel Selection
This Home Theater System is equipped with a
frequency synthesized tuner capable of receiving up
to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the Home Theater System to the desired type of
antenna or cable TV system, as shown in Connecting
Antenna/Cable TV to Home Theater System on page 13.
AUTO CHANNEL PROGRAMMING
1. Press MENU and the MAIN menu will appear.
2. Use v/V to select the TUNING menu, then press
MEMORY/ENTER.
The TUNING menu will appear.
3. Use V to choose the SOURCE SELECT option,
then use b/B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1 or
LINE2.
4. Use v/V to choose the AUTO CHANNEL SET
option, then use b/B to search for channels.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
5. After the AUTO CHANNEL SET PROCEEDING is
complete, make sure the TUNING BAND is set
appropriately (TV or CATV). Choose the correct
TUNING BAND (TV or CATV) with b/B while in the
TUNING menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
6. Press MENU to return to the TV screen.
7. Use TRK/PRESET(-/+) (v/V) on the remote control
to cycle the Home Theater System through the
channels in memory.
TO ADD OR ERASE CHANNELS FROM
MEMORY
This feature allows you to add or erase channels from
memory manually.
1 Use V to choose the CH. ADD/DEL option on the
TUNING menu. Use b/B to select a channel to
add or erase.
2 Use MEMORY/ENTER to add or erase the
channel.
Repeat steps 1 and 2 to add or erase channels.
3 Press MENU to remove menu.