beautypg.com

Unpac np np king and asse a a mbly – Lynx Professional Grills 42" Free Standing Grill L42PSR-1 User Manual

Page 30

background image

30

unpAC

np

np

king And Asse

A

A

Mbly

T

he grill arrives nearly ready

to use and requires only

minor assembly.

to use and requires only

to use and requires only

By carefully following the

uncrating and unpacking

steps, you will improve the

uncrating and unpacking

uncrating and unpacking

customer’s first

steps, you will improve the

steps, you will improve the

customer’

customer’

lynx experi-

ll

ence.
Shipping weight on smaller

units is app. 300 pounds and

Shipping weight on smaller

Shipping weight on smaller

larger units may weigh over

units is app. 300 pounds and

units is app. 300 pounds and

500 pounds.

CrATe & CArTon:

ImPortant!

do not remove staples

around the top of the

o not remove staples

o not remove staples

carton. These staples

around the top of the

around the top of the

hold a wooden pallet in

carton. These staples

carton. These staples

place inside the carton

hold a wooden pallet in

hold a wooden pallet in

that protects the unit from

place inside the carton

place inside the carton

damage. Removing these

that protects the unit from

that protects the unit from

staples may cause the

pallet to fall on the top of

staples may cause the

staples may cause the

grill.

pallet to fall on the top of

pallet to fall on the top of

how to remove the

Carton

cut the main strap holding

the grill to the pallet.

ut the main strap holding

ut the main strap holding

Remove the staples at the

bottom

Remove the staples at the

Remove the staples at the

of the carton.

Remove the staples at the

Remove the staples at the

Lift off the carton.
With assistance, remove

grill from pallet and place

into desired location.

grill from pallet and place

grill from pallet and place


warning
EXCESSIVE WEIGHT HAZARD!

Use two or more people to

move or install this unit. Fail

Use two or more people to

Use two or more people to

-

ure to follow this instruction

can result in back or other

injuries.

The wheels sit down in the

gaps of the shipping crate so

that the grill can sit safely and

gaps of the shipping crate so

gaps of the shipping crate so

solidly on the crate during

shipping. The grill cannot be

slid directly off of the pallet.

shipping. The grill cannot be

shipping. The grill cannot be

grill off of the pallet is by

lifting one end of the grill

grill off of the pallet is by

grill off of the pallet is by

high enough to place a ramp

under the wheel and then lift

high enough to place a ramp

high enough to place a ramp

the other end while rolling the

grill off of the pallet.

the other end while rolling the

the other end while rolling the

inTerior PACK

erior P

erior P

ing

lynx uses sturdy tie-down

ll

cables and straps to ensure

your grill arrives at your home

cables and straps to ensure

cables and straps to ensure

in the same condition that

it left our factory. BE SURE

you hAve

A

A

reMoved All

Tie downs before using

your grill.

Remove the white

accessory box and wood

packing, the grill racks, and

remove any loose items

packing, the grill racks, and

packing, the grill racks, and

from the firebox.

remove any loose items

remove any loose items

carefully cut the

cable ties securing

the

warming

rack and

rotisserie

spit (if

equipped).

spit (if

spit (if

cut the strapping that

secures the briquette trays

ut the strapping that

ut the strapping that

and carefully lift them out,

secures the briquette trays

secures the briquette trays

front first.

and carefully lift them out,

and carefully lift them out,

ake sure you

remember

to remove

the wire tie-

downs on the

burners.

ear™ models, cut

and remove ties from the

burner partition on the left

side of the Pr

burner partition on the left

burner partition on the left

os

burner partition on the left

burner partition on the left

ear™

burner.

packing from

under

the burner cover.)

under

under

Ensure that all burners are

properly seated on the

burner valve orifice and

properly seated on the

properly seated on the

sitting level with the legs

in the frame slots and no

sitting level with the legs

sitting level with the legs

side-to-side movement.