Lathem TRUALIGN TIME RECORDER 800P - Manual (Page 34)

800P TruAlign Time Recorder User Guide
Page 35
Appendix E - Disable Daylight Savings
Correction
By default, daylight saving time is factory set for the second
Sunday in March and the first Sunday in November.
If you are located in an area that does not recognize daylight
saving time, you can disable the automatic correction. To
disable the daylight savings correction, see the instructions
below.
Enter the ‘Setup Mode’. See Page 13.
Press the SET button until you get to Function 4.
Press the
+
or
-
button until the display shows ‘Y’. Then press
the SET button to go to Function 5.
Press the
+
or
-
button until the display shows ‘00’. Then
press the SET button to go to Function 9.
Press the SET button through Function 9, 10, 11, 12, 13, 14
and 15.
The time recorder will go to the normal time/date display
with the daylight savings correction disabled.