Linksys HPN200 - Manual (Page 13)

15. NT will ask you to enter a Workgroup or Domain name. If you are unsure
as to what your Workgroup or Domain name should be, consult your net-
work administrator or your Windows NT documentation. Enter the correct
information and click the Next button.
16. Click the Finish button, and when you are asked to restart your computer,
click the Yes button.
17. Your PC will reboot. Login to NT when the login window appears. The
installation is complete
To make sure that your network is functioning, click on the Network
Neighborhood icon on the Windows desktop of any networked PC. You should
see the names of all of the PCs on the network. If any of the names are miss-
ing, refer to the Troubleshooting section in the back of this guide.
10M Phoneline Network Card
21
Linksys HomeLink ® Series
20
12. If you use TCP/IP, a window will ask you if you would like to use DHCP.
If you are unsure as to whether or not DHCP should be set up, consult your
Windows NT documentation. Choose Yes or No to continue.
13. NT will copy files onto your computer. This may take a minute. If you
receive an error that says your PC is unable to open a file, put the Linksys
HomeLink CD back in the CD-ROM drive. Wait a few seconds and click
the Retry button.
14. The Bindings window will appear. If you are unsure as to how your bind-
ings should be setup, consult your NT documentation. If your bindings look
correct, click Next, then Next again.