Lenovo LT1952P - Manual (Page 25)

Chapter 3. Reference information
3-5
L194 Wide Flat Panel Monitor User’s Guide
Installing the monitor driver in Windows Vista
To install the device driver in Microsoft® Windows Vista, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows Vista.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo
recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows Vista operating system.
4. Open the
Display Properties window by clicking Start, Control Panel and then click
the
Hardware and Sound icon.
5. Click the
Personalization icon.
6. Click the
Display Settings icon.
7. Click the
Advanced Settings button.
8. Click the
Monitor tab.
9. Click the
Properties button.
10. Click the
Driver tab.
11. Open the
"Update Driver Software-Generic PnP Monitor" window by clicking on
Update Driver and then click the
"Browse my computer for driver software" button.
12. Select
“Let me pick from a list of device drivers on my computer” button.
13. Insert the Lenovo Monitor CD into the CD drive and click the
Have Disk button.
Click on the
Browse button and navigate to the following directory:
X:\Monitor Drivers\(where X is the drive letter designator for the CD-ROM drive).
14. Select the
" LT1952pwD.inf " file and click the Open button. Click the OK button.
15.Select
LT1952pwD and click Next. The files will be copied from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.