Kenwood KDC-2025 - Manual (Page 5)

— 5 —
• If you experience problems during
installation, consult your Kenwood dealer.
• If the unit does not seem to be working
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenwood dealer.
• Press the reset button if the Disc auto
changer fails to operate correctly. Normal
operation should be restored.
• Characters in the LCD may become difficult
to read in temperatures below 41 ˚F (5 ˚C).
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
NOTE
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot,
clean it every once in a while. Your CDs can
get scratched if you put them in a dusty CD
slot.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.
Refer to the instruction manual of Sirius
Satellite radio tuner KTC-SR902/KTC-SR901
(optional accessory), when connected, for the
operation method.
Refer to the sections of A models for
operations.
Entering and Exiting Channel Search
in Sirius Satellite radio tuner source
When entering and exiting the Channel Search
mode press the [C.S.] button for at least 1
second.
Each time the [C.S.] button is pressed for at
least 1 second the Channel Search mode turns
ON or OFF.
About Sirius Satellite radio
tuner
SCRL
AUTO AME SCAN AUD RDM REP M.RDM OFF
C.S.
LOU D
EXTERNAL MEDIA CONTROL
DISP MENU
Reset button
SCRL
AUTO AME SCAN AUD RDM REP M.RDM OFF
C.S.
LOU D
EXTERNAL MEDIA CONTROL
DISP MENU
SRC AUTO
FM/
C.S.
1 - 6 DISP/
MENU
¢ 4
AM/
SCRL
KDC-MP225/225/2025_U.S 03.11.14 5:18 PM Page 5