Kenwood KRC-779R EN - Manual (Page 11)

Adjust various parameters of sound quality.
Hold down the AUD button for one second or more to enter
the control mode.
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the
adjustment modes.
Source tone memory
Each source (tape, CD, FM, AM, and disc changer) has its own
memory in which to store the bass, middle, and treble tone
settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode
uses the tone settings made for FM, AM for AM, etc.).
Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
Press the AUD button to end the control mode.
• Determining the parameters in the audio control setting will
clear all the adjustments made in the System Q and they are
replaced with the values made in the audio control setting.
• The following parameters can be set when the System Q
function on the menu settings is ON.
Bass centre frequency, bass quality factor, bass extend, middle
centre frequency, middle quality factor, and treble centre
frequency.
NOTE
4
3
NOTE
2
1
Audio Control Setting
Audio control features
— 11 —
AUD
SCAN B NR B.S/RDM REP MTL/M.RDM
ANG
PROG PROG
LOUD T I DISP
NAME.S
VOL ADJ
/PTY
PWR OFF
AUD FM
4 ¢
AM
KRC-V879R
KRC-779R
Selecting mode Setting value
Selecting mode Setting value