Kodak INNOVATION I100 - Manual (Page 11)

8 A-61514 September 2004
Recommended system
configuration To operate the scanner at its optimum speed, the following configuration (or
better) is recommended.
NOTE: The actual performance of the system depends on the scanning
application, choice of scanning parameters, and the host
computer configuration.
• IBM PC (or compatible) with a Pentium IV 2.5 GHz processor
• Microsoft Windows 98SE, Windows Millennium Edition (Me), Windows 2000
Professional, or Windows XP
• 200 MB of available hard disk space
• 512 MB of RAM
• Monitor (VGA)
• Mouse
Unpacking the scanner
The scanner box contains the following items:
• Kodak i100 Series Scanner
• Input tray
• Output tray
• Power supply
• Power cord(s)
• Installation CD
• Kodak Capture Software Lite CD
• Read Me Now sheet
• User’s Guide (printed English version; User’s Guide .pdf files in nine other
languages are included on the Installation CD)
• Registration sheet
• IEEE FireWire Kit
NOTE: Save all packing materials for possible future use.
Registering
your scanner
It is very important that you register your scanner so Kodak can provide you
with the best possible service and support. Registering your scanner will help
us provide you with firmware and hardware updates as they become available.
NOTE: The scanner must be registered before any service support can
be provided.
You can register your scanner’s new equipment warranty online at
www.kodak.com/go/DIwarrantyregistration.
For more information about Kodak’s service and support options, contact
your reseller of Kodak Document Imaging products or visit us on the web at
www.kodak.com/go/DIserviceandsupport.