Kenwood LZ-702IR - Manual (Page 6)

6 | English
Setup Menu
Menu System
The Menu system operation method is explained
here. The reference for the Menu items and their
setting content is after this operation explanation.
1 Enter Menu mode
Press the [MENU] button.
Menu screen is displayed, and the monitor enters
to Menu mode.
AV-IN1
Normal
On
2MHz AV-OUT
IR HEADPHONE
Surround
Frequency
2 Select the menu item
Press the [MENU] button.
Each time the button is pressed, the menu item
switches.
3 Set the menu item
Press the [ 2] or [3] button.
You can continue by returning to step 2 and
setting other items.
4 Exit Menu mode
Press the [MODE] button.
• You can select "Surround" and "Frequency" when
HEADPHONE> is not set to "Off".
• If you make no operation for 15 seconds, this mode
is automatically canceled.
Current menu item
Display information
When you press the [V.SEL] button, the status of
the monitor is displayed.
Mode Full
I R Off A V AV-IN1
AV-IN2
1
3
2 4
1 Screen mode Display
2 IR Headphones audio setting Display
3 Video source Display
4 AV output Display
• The information display is cleared automatically after
approximately 5 seconds.
Operations
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Press the [MENU] button for at least 1 second.
Each time the button is pressed for at least 1
second, the AV output switches as follows:
Display Setting
"AV-IN1" Select the AV1 INPUT source.
"AV-IN2" Select the AV2 INPUT source.
"Off" No output to the AV OUTPUT terminals.