KORG DSD MR-1000 - Manual (Page 29)

29
Protecting a project
Here's how to protect a project. If you edit the name or delete or edit the mark settings of a
project that is protected, these settings will revert to their original state when you select an-
other project or turn off the power. A protected project is indicated by a lock icon displayed in
the project/file information field (the top line) of the level meter screen.
You can't protect an audio file that was recorded by a device other than the MR-1000 (such files
will be located in the AUDIO folder).
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select
and confirm "LIBRARY."
The library select (LIBRARY) screen will appear.
2. Use the P-dial to select and confirm the project whose Protect setting you want to
change. (See "Selecting and playing back a project/file," p.19)
If you want to protect the currently selected project, simply press the P-dial twice to con-
firm.
3. The project/file edit screen will appear, with the name of the project you just selected
shown at the top.
4. Turn the P-dial to move the selection icon to "Protect."
Push
5. Each time you press the P-dial, the setting will alternate between protecting ( ) and
un-protecting ( ) the project.
6. When you've finished making the setting, press the menu button to return to the
library select (LIBRARY) screen.
Deleting a project/file
Here's how to delete a file. Once you’ve deleted a file, it cannot be recovered, so use this opera-
tion with care.
You can't delete a project that's protected.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select
and confirm "LIBRARY."
The library select (LIBRARY) screen will appear.
2. Use the P-dial to select and confirm the project/file that you want to delete. (See "Se-
lecting and playing back a project/file," p.19)
To delete the currently selected project/file, simply press the P-dial twice.
Text2_E.p65 06.11.22, 1:23 PM 29