Kenwood KRF-V8030D User Manual
Page 28

28
Other
Specifications
For other countries (KRF-V8030D)
AUDIO section
Effective power output during STEREO operation
1kHz,10% T.H.D.,at 8
Ω ...........................................
140 W + 140 W
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at
8
Ω
from 20 Hz to 20 kHz with no more than 0.7% total harmonic
distortion.(FTC)
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8
Ω
, one channel driven)
.............................................................................. 140 W + 140 W
CENTER (1kHz, 10% T.H.D. at 8
Ω
, one channel driven)
............................................................................................. 140 W
SURROUND (1kHz, 10% T.H.D. at 8
Ω
, one channel driven)
.............................................................................. 140 W + 140 W
Total harmonic distortion ......................... 0.055% (1 kHz, 50W, 8
Ω
)
Frequency response
CD ............................................. 10 Hz ~ 53 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM) ........................................................................ 75 dB
CD ......................................................................................... 91 dB
Input sensitivity / impedance
PHONO (MM) ......................................................... 2.5 mV / 27 k
Ω
CD ......................................................................... 200 mV / 47 k
Ω
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 k
Ω
PRE OUT (SUBWOOFER) ......................................... 2 V / 2.2 k
Ω
Tone control
BASS (For Australia and U.S-Military) ....... ±10 dB (at 100 Hz)
BASS (Other countries) ................................ ±10 dB (at 60 Hz)
TREBLE .......................................................... ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
Optical ............................. (-15 dBm ~ -21 dBm), 660 nm ±30nm
Coaxial ................................................................. 0.5 Vp-p / 75
Ω
VIDEO section
VIDEO inputs / outputs
VIDEO
(composite) ........................................... 1 Vp-p / 75
Ω
S VIDEO (luminance signal) ................................ 1 Vp-p / 75
Ω
(chrominance signal) .................... 0.286 Vp-p / 75
Ω
FM tuner section
Tuning frequency range ................................... 87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................ 1.6 µV (75
Ω
)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO ................................................ 31.6 µV (75
Ω
)/ 41.2 dBf
Total harmonic distortion (1 kHz)
MONO ............................................................ 0.6% (65 dBf input)
STEREO ........................................................ 0.7% (65 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO .......................................................... 75 dB (65 dBf input)
STEREO ...................................................... 68 dB (65 dBf input)
Stereo separation (1 kHz) .......................................................... 38 dB
Selectivity (±400 kHz) ................................................................. 50 dB
Frequency response ................. (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
9 kHz step ................................................... 531 kHz ~ 1,602 kHz
10 kHz step ................................................. 530 kHz ~ 1,610 kHz
Usable sensitivity (30% mod., S/N 20 dB)
........................................................................ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input) ........................... 50 dB
GENERAL
Power consumption .................................................................. 250 W
AC outlet
SWITCHED ....................................................... (total 90 W max.)
Dimensions ...................................................................... W : 440 mm
H : 143 mm
D : 400 mm
Weight (Net) ............................................................................... 7,4 kg
Caution : Read this page carefully to ensure safe
operation.
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).