Kenwood KDC-519 - Manual (Page 19)

1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2 Enter Clock Adjust mode
Press the [
4] or [¢] button for at least 1 second.
The clock display blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
4] or [¢] button.
4 Exit Clock adjustment mode
Press the [MENU] button.
Manual Clock Adjustment
Setting the operation check sound (beep sound) ON/OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.
Touch Sensor Tone
1 Turn the power ON.
2 Do the step 4 and 5 operation, and enter the Security Code.
"APPROVED" is displayed.
The unit can be used.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3 Enter Security Code mode
Press the [
4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4 Enter the Security Code
Press the [#1] — [#4] button.
Example: If the Security Code is "3510".
Step Button #Times pressed Display
1 [#1] 4 "3"
2 [#2] 6 "5"
3 [#3] 2 "1"
4 [#4] 1 "0"
5 Confirm the Security Code
Press the [DISP] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
6 Do the step 4 and 5 step operation, and reenter the security
code.
"APPROVED" is displayed.
The Security Code function activates.
When a Code different from step 4 is entered, repeat from step 4.
Press the Reset button and when it's removed from the
battery power source
— 19 —
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 19