Kenwood KDC-519 User Manual
Page 11
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
1
Turn the ignition OFF or press the [SRC] button for at least 1
second.
The power turns OFF and the faceplate slides open.
2
Holding the center part of the faceplate pull it out.
• When the faceplate is kept remove open, according to the Wait Time Setting> (page 20) setting, the faceplate is hidden and • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much Reattaching the Faceplate 1 Set the left side of the faceplate in the faceplate bracket. 2 Press the right side of the faceplate until it locks. Theft Deterrent Faceplate Press the [ANG] button for at least 1 second. Do not apply excessive force to the faceplate. It can cause damage. Faceplate Angle Adjustment The presently selected AUX Name is displayed. 3 Select the Auxiliary input display 4] or [¢] button. Each time the button is pressed it switches through the below • "AUX" 4 Exit Auxiliary input display setting mode When operation stops for 10 seconds, the name at that time is — 11 — KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 11
the power turns OFF.
its special storage case while detached.
dust or the possibility of water splashing.
Press the [
displays.
• "TV"
• "VCP"
• "GAME"
• "PORTABLE"
Press the [DISP] button.
selected, and Auxiliary input display setting mode closes.