User’s manual, Inserting and removing the battery – Konica Minolta E50 User Manual

Page 19

Text mode
Original mode

User’s Manual >>

E-19

Inserting and Removing the Battery

Only use the specified rechargeable lithium-ion battery (3.7V) . Charge the battery
before using the camera. Make sure that the power of the camera is off before
inserting or removing the battery.

Inserting the Battery

1. Open the battery/SD card cover.
2. Insert the battery in the correct orientation

shown.

Tilt the battery lock lever in the direction

of the arrow and orient the battery so
that its label is facing to the rear side of
the camera, and then insert the battery.

3. Close the battery/SD card cover.

Removing the Battery

Open the battery/SD card cover and then release the battery lock lever. When
the battery has come out a little, slowly pull it out the rest of the way.