Kompernass KH 1191 - Manual (Page 8)

- 6 -
Disassembly of the Biscuit
Shaper
1. Place the direction switch q onto the arrow
pointing upwards .
2. Press and hold the start button w until the
threaded rod t has completely extended
itself outwards.
Danger!:
Remove the power plug e from the wall socket
before disassembling the appliance.
3. Unscrew the lock ring s .
4. Turn the container u so that the arrow is
directed at the open lock .
5. Loosen the container u from the motor unit r .
The threaded rod t with pusher y can now
also be dismantled.
Tips
• If need be, remove residues from the Biscuit
Shaper with a knife, pastry scraper or similar.
• The consistency of the pastry or the decorative
substance should be such that it easily flows from
the motif discs
d or nozzles o and remains
affixed onto the baking paper or the item being
decorated.
• Should the appliance refuse to start, it could be
that the pastry or the decorative substance is too
firm or that the container
u is not correctly
attached to the motor unit r .
• If the pastry is too firm to be processed, knead in
some egg yolk or mix in some fluids.
• Biscuit pastry that has lain in the re-frigerator can
become too firm for processing.
• Should the pastry to be processed be too soft,
lay it in the refrigerator for approx. 15 minutes
or knead in a little more flour.
• If the biscuit pastry contains finely ground consti-
tuents (e.g. nuts or almonds), select a motif disc
d with larger openings.
• With some pastries and motif discs it is better to
work quickly, with others, better to work slowly.
• Simply use trial and error until you can produce
biscuits that match your expectations.
• If you want to use various motif discs and nozz-
les, first of all use all of the currently filled pastry
or decorative substance. Change the motif discs
and nozzles when you refill the Biscuit Shaper.
Cleaning and care
Danger!:
Remove the plug e from the wall socket before
cleaning the appliance.
As it is difficult to remove dried-on pastry remains,
always clean the Biscuit Shaper and the motif discs
employed
d directly after use.
Danger!:
The motor unit r may NOT be submerged in
water. If necessary, this can be wiped clean with
a moist cloth.
Do not use sharp or abrasive objects for cleaning.
Do not use aggressive or chemical cleaning agents.
Dismantle the Biscuit Shaper completely.
You can clean all parts, except the motor unit r , in
the dishwasher or in a mild soapy water. All parts,
except the motor unit
r , are dishwasher proof.
IB_KH1191_E4905_LB6 07.07.2008 14:48 Uhr Seite 6