Kenwood DPX308U - Manual (Page 20)

20
| DPX308U
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button.
Select the “TUNER” display.
Selecting the Receiving Band
Press the [BAND] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [ 4] or [¢] button.
✍ Details of the station selecting in operation are
set in the
“SEEK MODE” of (page
20) .
Tuner Setting
You can select the following Tuner Setting items.
1
Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the desired
item is displayed.
Select “SETTINGS”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the desired
item is displayed.
Display Overview
“SETTINGS”
“SEEK MODE” Selects the tuning mode of the radio.
“AUTO1”: Automatic search for a station.
“AUTO2”: Search in order of the stations in the
Preset memory.
“MANUAL”: Normal manual tuning control.
“AUTO MEMORY” Memorizes 6 stations with good reception
automatically.
Refer to (page 21) .
“FORCED MONO” Reduces the noise when stereo broadcasts are
received as monaural.
“ON”/ “OFF”
( : Factory setting)
5
Make a setting
Turn the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
Remarks
• FORCED MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
SRC
VOL BAND 4 ¢
1 – 6