Assembly – Keys Fitness HT-PRO User Manual
Page 7
Assembly
7
Figure 3
Figure 4
Step 3:
Connect the console harness from inside
the left upright to the console harness from
the base assembly as shown in Figure 3.
Next, attach left upright and right upright
to base using Allen bolts M8x15 (Qty. 8)
and washers 9x22x2 mm (Qty. 8). Do not
tighten bolts all the way at this time.
Step 4:
Attach the console assembly by connect-
ing the console harness, incline harness,
EKG harness, and speed harness as shown
in Figure 4.
Next, attach the console assembly to the
left and right uprights using Phillips screws
M6x12 (Qty. 4).
CONSOLE HARNESS
ALLEN BOLT
WASHER
PHILLIPS SCREW
CONSOLE
WIRE HARNESS
UPRIGHTS
See also other documents in the category Keys Fitness Sports and recreation:
- DCV5.2U (14 pages)
- CardioMax CM708EL (20 pages)
- Health Trainer CLASSIC HT-CLASSIC (29 pages)
- MS3200GT (20 pages)
- ET920D (12 pages)
- ALL800 (20 pages)
- Strength Trainer ST-PT (8 pages)
- 1350 (20 pages)
- Milestone 6200HR (20 pages)
- KF-HCL (13 pages)
- Cable Crossover KF-CC (16 pages)
- CM580U (8 pages)
- Inversion Table IT-2 (16 pages)
- NEOPRENE DUMBBELL RACK STDFR/B (4 pages)
- Dumbbell Rack 4ft KF-DB4 (9 pages)
- HT-ELITE (29 pages)
- Triumph 7.3t (28 pages)
- HT95T (1 page)
- 4500T (32 pages)
- Treadmill CZCLUB (22 pages)
- KF-ABM (13 pages)
- PRO 550 (17 pages)
- ET835D (12 pages)
- KPS-LSR (8 pages)
- Power System 1850 (34 pages)
- KPS-FI (1 page)
- Alliance 900 (17 pages)
- KPS-LEGM (12 pages)
- KF-PC (12 pages)
- HT65T.1 (30 pages)
- CardioZone CZE (20 pages)
- KPS-US (1 page)
- KF-HC (13 pages)
- Health Trainer 800HR HT800HR (19 pages)
- CardioMax 708S (1 page)
- Power Tower ST-PT Series (11 pages)
- KF-ARMA (9 pages)
- 900R (10 pages)
- CARDIOZONE E-CZ200 (28 pages)
- HealthTrainer HT-760T (35 pages)
- E55 (31 pages)
- KF-2-5T (36 pages)
- KPS-45 (12 pages)
- KF-LATM (13 pages)
- CardioZone CZ PRO (20 pages)