Kawasaki 1600 - Manual (Page 20)

18 ASSEMBLY
A. Horn
B. Bolt (D = 8, L = 12)
C. Bracket
Choke Knob
•
Loosen the locknut and fasten the choke knob
to the bracket with locknut.
A. Choke Knob
B. Locknut
C. Bracket
Rear View Mirrors (Left and Right)
Conventional Type (Single Nut)
•
Loosen the locknut completely.
•
Screw the rear view mirror in completely, and
then back it two turns out.
•
Turn the mirror stay to assure visibility to the
rear with the operator sitting on the motorcy-
cle and tighten the locknut securely.
•
Adjust the rear view mirror by slightly moving
only the mirror portion of the assembly.
A. Locknut
B. Rear View Mirror (Left)
•
Installation and adjustment of the right side
mirror is common with the left side. Follow
the procedure specified for the left side.
Turning Stay Type
•
Screw the mounting area of the left rear view
mirror into the holder all the way, and tighten
the lower hexagonal area securely.
A. Lower Hexagonal Area for Tightening
B. Upper Hexagonal Area (Adapter)
C. Rear View Mirror (Left)
CAUTION
Do not force to tighten and/or loosen the
upper hexagonal area (adapter) with a
spanner or wrench. Disassembly of this
area is not possible.
Non-permanent
locking agent is already applied to the
threads of this inner area. Forcible loos-
ening may damage the adapter and/or
the turning mechanism of the stay.