Kyocera Candid KX16 - Manual (Page 20)

14 Making and Answering Calls
Controlling network roaming
Specifying digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
1. Select Menu
→
Settings
→
Network
→
Digital/Analog .
2. Select an option and press .
– Automatic automatically switches the
phone between digital and analog.
– Analog only sets the phone to work in
analog mode only.
– Analog call forces a call into analog mode
for the duration of the next call.
– Digital only sets the phone to work in
digital mode only.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
1. Select Menu
→
Settings
→
Network
→
Roam Option .
2. Select an option and press .
– Automatic (recommended setting)
accepts any system the phone service
provides.
– No roaming prevents you from making
or receiving calls outside of your home
service area.
Note: If your phone has more than one setting for
Automatic, contact you service provider to
determine which one to use.