Kenwood KDC-PSW9521 EN - Manual (Page 18)

Putting a station with good reception in the memory
automatically.
1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "Auto Memory"/"A-Memory" display.
4 Open Auto Memory Entry
Press the [
4] or [¢] button for at least 2 seconds.
When 8 stations that can be received are put in the memory
Auto Memory Entry closes.
Auto Memory Entry
4 Select the preset number
Press the [FM] or [AM] button.
5 Put the frequency in the memory
Press the [P.M] button for at least 2 seconds.
The preset number display blinks 1 time.
6 Repeating steps 3 to 5 and putting the desired broadcast
station in the memory.
On each band, 1 station can be put in the memory on each [#1]
— [#8].
7 Exit Memory mode
Press the [P.M] button.
Putting the station in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Enter Memory mode
Press the [P.M] button for at least 1 second.
"Preset Memory" is displayed.
3 Select the frequency to put in the memory
Press the [
4] or [¢] button.
Station Preset Memory
Entering the frequency and tuning.
1 Select the band
Press the [FM] or [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3 Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency Press button
92.1 MHz (FM) [#0], [#9], [#2], [#1]
810 kHz (AM) [#0], [#8], [#1], [#0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Direct Access Tuning (Function of remote)
Tuner features
— 18 —
English
KDC-M907 _U.S 04.2.4 4:17 PM Page 18