Kenwood CK 300 - Manual (Page 23)

23
Fig. 8.2 Fig. 8.1
S
F
C
BURNERS
The burners can be removed and washed
with soapy water only.
They will remain perfect if always
cleaned with products used for silver-
ware.
After cleaning, check that the burner-
caps and burner-heads are dry before
placing them in the respective hous-
ings.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
8.1 - 8.2) - failure to do so can cause a
poor burner flame and/or damage to the
burner and hob.
Check that the electrode “S” (fig. 8.1) is
always clean to ensure trouble-free
sparking.