Knoll Systems HD102 - Manual (Page 3)

3
TABLE OF CONTENTS
Safety Warnings 2
Introduction 5
Positioning the projector 6
Projector and Device Connector Guide 6
Computer connections 6
Video connections 7
Connecting a computer source 8
Required computer connections 8
Optional computer connections 8
Displaying a computer source image 9
Adjusting the image 9
Using the projector with Windows 98 for the first time 10
Connecting a video device 11
Video device connections 11
RCA composite video connection 12
S-video connection 12
RCA component connection 12
DVI connection 12
Displaying video 13
Adjusting the image 13
Shutting down the projector 14
Troubleshooting your setup 14
Using the remote control 19
Using the audio 19
Using the keypad buttons 19
Optimizing computer images 20
Optimizing video images 20
Customizing the projector 21
Using the menus 21
Picture menu 22
Settings menu 25
Maintenance 25
Cleaning the Lens 24
Replacing the Projection Lamp 25
Cleaning the Lamp Housing Screens 26
Using the security lock 26
Appendix 27
Projected Image Size 27
Red LED Behavior and Projector Errors 27
If you are experienced in setting up projection systems, use the Quick Setup card that is included with the
projector. For complete details on connecting and operating the projector, refer to this User’s Guide.