Knoll Systems HD102 - Manual (Page 24)

24
Settings menu
Audio: allows adjustments to Volume of the internal speaker and allows a
chime to play when starting the projector.
Adjustments can also be made from the projector’s
keypad and the remote.
Sources: determines which source the projector
checks first for active video during power-up. When
Autosource is selected, the Source Enable
feature indicates which sources the projector
attempts to lock onto. You can use the Source
Enable feature to eliminate certain sources from
this search, which will speed the search. The source
options are Computer for a computer,
progressive DVD, or HDTV source, Video 1 for
S-video connections, Video 2 for
component video connections and
Video 3 for composite video sources.
By default, the check boxes for all
sources are checked. Uncheck a
source box to eliminate it from the
search. When Autosource is not
checked, the projector defaults to the
source selected in Sources. To
display another source, you must
manually select one by pressing the Computer or Video button on the remote or keypad.
System>Rear: reverses the image so you can project from behind
a translucent screen. Ceiling: turns the image upside down for
ceiling-mounted projection. Low Power: toggles between on and
Off. Turn it on to lower the light output of the lamp. This also
lowers the fan speed, making the projector quieter. Display
Messages: displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen. Screen Saver Off:
prevents the screensaver on your computer from being activated if
the USB portion of the M1 is plugged into the computer. This
function was previously called NND. Power Save: automatically
turns the lamp off after no signals are detected for 20 minutes.
After 10 additional minutes with no signal, the projector
powers down. If an active signal is received before the projector
powers down, the image will be displayed. After an additional 10 minutes with
no signal, the projector powers down and can be toggled off. If an active signal
is received before the projector powers down, the image will be
displayed.
Startup Logo: allows you to display a blank screen instead of the
Default screen at startup, and when no source is detected.
Blank Screen: determines what color is displayed when you press
the Blank button on the remote.
Language: allows you to select a language for the onscreen display.