Kenwood SW-508 - Manual (Page 8)

ENGLISH
8 EN
SW-508 1229/02-08/EN
Specifications
Type ...................... Subwoofer system with built-in amplifier
[Amplifier]
Dynamic Power ...................................... 75 W + 75 W (6 Ω)
Rated Output Power .......... 60 W + 60 W RMS (100 Hz,6 Ω)
Input Sensitivity / Impedance
LINE INPUT ............................................ 230 mV (22 k Ω)
SPEAKER INPUT (1ch input) ................... 2.0 V (6.5 k Ω)
Frequency Responce
TURNOVER ON ..................................... 15 Hz ~ 200 Hz
TURNOVER OFF .................................... 15 Hz ~ 3.5 kHz
Rated Power Consumption ....................................... 100 W
Notes:
1. Kenwood follows a policy of continuous advancements in development. For this reason, specifications may be changed without
notice.
2. Full performance may not be exhibited in extremely cold locations (below 0 deg. C).
[Speaker]
Enclosure .......................... Bass-Reflex, Floor Standing Type
Speaker Units ..................... 160 mm (6-5/16") Cone type x 2
Nominal Impedance ....................................................... 6 Ω
Dimensions
Width ................................................... : 219 mm (8-5/8 ")
Height .............................................. : 439 mm (17-5/16 ")
Depth ............................................... : 392 mm (15-7/16 ")
Net Weight ................................................... 14.5 kg (32.0 lb)