Kenwood TK-2160 - Manual (Page 6)

TK-2160
6
Assembling
• Installation of battery terminal block and
packing
Install them so that no distortion or deformation occurs.
• Installation of speakers and cushion, and wire
styling of speakers
Install the speakers so that they do not protrude from the
cushion. Perform the wire styling of speakers as shown in a
photograph.
• Attaching the cushion
Attach the cushion as shown in Fig. 1.
Note: Cushion must not cover the screws A,B and C.
DISASSEMBLY FOR REPAIR
Install the cushion
according to the
guide.
• Installation of chassis and cabinet assy
Wire Styling
B
A
C
Fig. 1
Take screw B and
MIC edge as reference
line when sticking.
G13-2018-04
Stick between screw
A and B.
G13-2017-04
G13-2020-04
Do not press this area, top
packing easily deform.
Second, press down the Chassis to the
cabinet assy as shown in the diagram.
Good Condition NG Condition
After mount, packing
should be in this
condition. Packing deform.
Packing protruded out.
Note:
• Take care that the packing does not protrude from the
chassis or case.
• Replace the protruded or deformed packing with a new one.
First, mount the set to the cabinet assy.