Kingston Technology Kingston Fast EtheRx KNS3250/R - Manual (Page 26)

KNS3250/R Users Guide - Rev. A00 Kingston Technology Company
Kingston Switch Configuration Utility 21
The group count is not limited. Users can specify n VLAN groups or even more
groups for any n (n=number of ports on your switch) port switch. But note that
after writing to the device, only the information of the rst n/2 added VLAN
groups can be read back from the device of n port switch.
Note: Once at least one VLAN group has been added, the system will automatically
gather all un-selected members as an implicit VLAN group. Users are recommended
to explicitly assign all groups they need, although they know that there exists an
implicit VLAN group.
Group Name: Create a group name up to 8 characters long.
Individual Port / Trunk: Both individual ports and trunks can be the members of
a VLAN group. All light checkboxes are qualied members of a VLAN. At least
two members must be selected to create a VLAN group.
Out-link Selection: If ood control is enabled, one port or trunk should be chosen
as the out-link of this VLAN group. Click on the button to the right of ‘Out-Link
Selection’ to bring up the popup window.