Kenwood AUDIO PROCESSOR - Manual (Page 10)

REAR PANEL CONTROLS
19 18 22 20
23 24
21 22 25
(18) MIC SELECT
This three position switch selects the YAESU, KENWOOD or
ICOM microphone plugged into the 8 pin Mic Input (19).
(Other microphones supported with mic adapters)
(19) MIC INPUT
This Input uses an 8 Pin microphone male connector. The
impedance of this input is set by the Audio Input 3 position
toggle switch (4). Do not use this connector when RCA Mic
In (20) or the Aux Input (21) is being used.
Icom Ken Yaesu
+Mic +Mic
+5V PTT +5V
PTT +5V
PTT
Gnd - Mic Gnd
Gnd +Mic
1
2
5
6
7
8
J8
Pin
PTT
PTT
Gnd
Gnd
-10-