Kodak PLAYSPORT Zx3 - Manual (Page 16)

Getting help
16 www.kodak.com/go/easysharecenter
NOTE: If problems persist, go to www.kodak.com/go/support and click Step-by-Step Solutions
& Repair.
Problem Solution
No power. ■ Ensure the battery is correctly inserted, charged.
LCD is not clear. ■ Choose an LCD Glare Shield ( page 13 ).
LCD is B&W. ■ Choose a different LCD Glare Shield ( page 13 ).
Videos are choppy
or jumpy when
played on a
computer. ■ Use ARCSOFT MEDIAIMPRESSION Software for
KODAK Software for video playback (
page 7 ).
■ Ensure that the computer system requirements
are met. Go to
www.arcsoft.com/support .
Videos are blurry. ■ Ensure that the lens is clean.
■ Turn on Electronic Image Stabilization
(
page 13 ).
■ If using a tripod, turn off Electronic Image
Stabilization.
■ For underwater videos, see page 14 .
Videos do not play
on a TV. ■ Ensure that an HDMI or AV Cable is properly
connected directly to the TV input (
page 12 ).
■ Ensure that the TV menu settings are correct for
an HDMI or AV connection.
■ Ensure that Video Out is set correctly ( page 13 ).
Videos are in low
resolution and/or
are not saved. ■ If no card is inserted and the camera is powered
by the AC adapter, then videos are taken in low
resolution and not saved. (The camera is in Demo
mode.) Insert a card or unplug the AC adapter.
Problems with
ARCSOFT Software. ■ Go to www.arcsoft.com/support .