Parameters, Normal edit mode / ex edit mode, Drawbar parameters (group 2) – KORG CX-3 User Manual

Page 21: Group 1, Group 2

Parameters

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123

Parameters

1. Normal Edit mode /

EX Edit mode

When you press a PROGRAM [1]–[8] key in Normal
Edit mode or EX Edit mode, the first parameter in
the Group 1–Group 8 listed below will be selected
directly.

Group 1

Set the output level, tone wheel, and click level.

Group 2

Set the drawbar levels for the Upper tone generator
and the Lower tone generator.
The displayed parameters will differ between Normal
Edit mode and EX Edit mode.

Group 3

Specify how the keys of the PERCUSSION section will
function.

Group 4

Adjust the amp settings.

Group 5

Adjust the reverb settings.

Group 6

Adjust the rotary speaker settings.

Group 7

Set the split point, and specify the function of the
pedal connected to the ASSIGNABLE PEDAL/SW
jack.
The displayed parameters will differ between Normal
Edit mode and EX Edit mode.

Group 8

Change the program name.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Group 1

Output Level

[0...127]

Specify the output level of the program.

Wheel Type

[Vintage, Clean]

Select the type of tone wheel.

Vintage:

A tone wheel with leakage noise.

Clean:

A tone wheel without leakage noise.

Over Tone Level

[0...99]

Specify the overtone level of the tone wheel.

Leakage Level

[0...99]

Specify the level of the leakage noise.

On Click Level

[0...99]

Specify the level of the click noise at key-on.

Off Click Level

[0...99]

Specify the level of the click noise at key-off.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Group 2

UPPER (Upper Drawbar Level)

[0...8]

This parameter is displayed in Normal Edit mode.

Specify the level for each drawbar used by the Upper
tone generator. From the left, the display corresponds
to the 16', 5-1/3', 8', 4', 2-2/3', 2', 1-3/5', 1-1/3', and 1'
bars.

When a bar is pulled out all the way, its level will be 8.

In Normal mode, pressing the [DISPLAY] key once
when the program name is displayed will show the
levels that you specified here.

The front panel Drawbar 1 or Drawbar 2 settings can
be copied instantly to the parameters of a program.
For details refer to “Copying drawbar parameters”
(p.14).

LOWER (Lower Drawbar Level)

[0...8]

This parameter is displayed in Normal Edit mode.
Specify the level for each drawbar used by the Lower
tone generator. From the left, the display corresponds
to the 16', 5-1/3', 8', 4', 2-2/3', 2', 1-3/5', 1-1/3', and 1'
bars.
When a bar is pulled out all the way, its level will be 8.
In Normal mode, pressing the [DISPLAY] key twice
when the program name is displayed will show the
levels that you specified here.

The front panel Drawbar 1 or Drawbar 2 settings can
be copied instantly to the parameters of a program.
For details refer to “Copying drawbar parameters”
(p.14).