Kyocera VM1450 - Manual (Page 101)

101
CUSTOMIZING YOUR PHONE
5.
Your phone will search for a Bluetooth device within range. Once detected, the name will be
displayed.
6.
Press [Pair] to pair the devices. “Add [device name] to my device?” will be displayed.
Press for “Yes”.
7.
Enter your passcode then press [OK]. Consult your Bluetooth device manual for the code.
Typically the default passcode is 0000.
8.
Once your new Bluetooth device is paired with your phone, you will see a confirmation screen.
Press to connect the device to your phone.
SETTINGS
Customizes your phone and optimizes performance through a variety of settings:
1.
Press [Menu], then press "Settings". Press "Bluetooth".
2.
Press "Settings".
3.
Press [Save] to save the settings.
• Set Bluetooth: Turn Bluetooth on or off.
• Handset’s visibility: Select “Hidden” or “Shown to all”.
• Handset’s Name: Edit the name of the device.
• If Bluetooth is disabled in your phone, you will get the message “Bluetooth is disabled. Enable?”.
Press to enable Bluetooth.