Kompernass KH 2300 - Manual (Page 14)

BASIC FEATURES OF THE CD PLAYER
• START PLAY: Press the PLAY/PAUSE button
&
- to start playing.
• INTERRUPT PLAY (PAUSE): Press the PLAY/PAUSE button
&
- to interrupt playing. The duration of play flashes in the display
@
.
Press the PLAY/PAUSE button
&
once more - to continue playing.
• STOP PLAY: Press the STOP button
7
- to stop playing.
• NEXT TRACK: The Forward button
)
jumps forward one track each time it is pressed.
• PREVIOUS TRACK: The Reverse button
8
jumps backward one track each time it is pressed.
• FORWARD: Keeping the Forward button
)
pressed goes forward within a track.
• REVERSE: Keeping the Reverse button
8
pressed goes backward within a track.
The CD compartment
!
can be opened anytime. Play stops automatically. Remove the CD only when movement has stopped
completely.
PROGRAMMING A TRACK SEQUENCE [ » TRACK MEMORY « ]
Programming a track sequence can only be done when the CD has stopped. You can program up to 20 titles.
0 1) Insert CD
0 2) Select the CD player using the device selector button
*
.
0 3) Press the MEMORY/CLK-ADJ button
\
. The display
@
shows TRACK MEMORY.
0 4) Using the Forward button
)
or Reverse button
8
select the number of the track you wish to play first.
0 5) Press the MEMORY/CLK-ADJ button
\
. The track is now stored in the first programmed position (P-01).
Repeat steps 3) - 5) for up to 20 tracks. You can also program a track several times.
The programmed track sequence is stored until you remove the CD from the CD compartment, choose another function
or switch off the equipment.
START PROGRAMMED TRACK SEQUENCE
0 1) Press the MEMORY/CLK-ADJ button
\
. The display
@
shows TRACK MEMORY and the programmed track.
0 2) Press the PLAY/PAUSE button
&
- to start playing in the programmed track sequence.
0 3) Press the STOP button
7
to switch of a programmed track sequence.
REPEAT FUNCTIONS [ » REPEAT « ]
• To repeat all the tracks on a CD, press the M-UP/REPEAT button = . The display @ shows REPEAT.
• To repeat a single track on a CD, press the M-UP/REPEAT button
=
twice when the desired track is running. The display
@
flashes REPEAT.
• To repeat a programmed track sequence on a CD, press the M-UP/REPEAT button
=
when the programmed track sequence
is running. The display @ shows REPEAT.
• To switch off the repeat functions, press the M-UP/REPEAT button
=
repeatedly until the display
@
no longer shows REPEAT.
PLAY TRACKS IN RANDOM SEQUENCE [ » RANDOM « ]
The RANDOM function selects a random choice of tracks from the inserted CD.
0 1) Insert CD
0 2) Select the CD player using the device selector button
*
.
0 3) Press the RANDOM button
(
. The display
@
shows RANDOM.
0 4) Press the PLAY/PAUSE button
&
- to start playing a random track sequence.
CASSETTE RECORDER
INSERT CASSETTE
0 1) Open the protective flap
+
forwards. Behind it you will find the operating buttons for the cassette recorder (and the headphone
connector).
0 2) Press the button
`
to open the cassette compartment. The cassette compartment opens automatically.
0 3) Insert the cassette with the tape side facing down. The tape should be tight and without loops.
0 4) Close the cassette compartment.
0 5) Select the cassette recorder using the device selector TAPE button
*
.
14