Kobe Range Hoods CH8136SQB User Manual

Page 13

Cleaning Stainless Steel Baffle Filter

CAUTION

: DRAIN OIL BEFORE RESIDUE CAN OVERFLOW.

1. Grasp knob on baffle filter and push filter toward rear .
2. Gently pull each baffle filter down and discard oil and residue.
3. Wash baffle filters with warm soapy water.
4. Dry thoroughly and put back.

NOTE: Baffle Filters are top rack dishwasher safe.

Figure 13

Replacing Light Bulb

CAUTION

HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.

1. Make sure all controls are OFF, and range hood is unplugged.
2. Place a flat-head screwdriver into the groove between the halogen light glass covering

and the housing .

3. Gently separate glass covering from the housing .
4. Gently pull out the defective light bulb

and discard. Light bulb should be 12V 20W

maximum.

5. Wear a glove or use a cloth to hold the new light bulb and push securely into light

socket. NOTE: DO NOT PUSH TOO HARD OR YOU MAY BREAK THE BULB
CONNECTOR.

6. Put back halogen light glass cover .
7. Plug back power cord and turn on range hood to test for operation.