Kenwood DV-502 - Manual (Page 20)

20
Operations
DV-502/DVF-3050 (EN/K,P,T,M,X)
DVD
Changing the Camera angle
CD VCD
Using IntroScan function
Using the ANGLE key on the remote
Using the on-screen banner display
2 Press the Cursor left/right (2/3)
keys until the ANGLE icon is high-
lighted.
3 Press the ENTER key.
The ANGLE menu appears
4 Select the angle with press the
ENTER key.
1 During playback, press the ANGLE
key on the remote.
2 Select the Camera angle with press
the ENTER key or ANGLE key.
1 During playback, press the ON
SCREEN key on the remote.
Some disc contains multiple angles particular scene or
sequence. If the disc only has one angle, this feature
won’t work. IntroScan plays the first few seconds of each track on
the CD similar to the scan feature that’s on many car
radios.
Using the on-screen banner display
2 Press the Cursor left/right (2/3) keys
until the IntroScan icon is highlighted.
3 Press the ENTER key.
1 During playback, press the ON
SCREEN key on the remote.
÷ The first 10 seconds of each track
play.
÷ After Intro Scan goes through all of
the tracks, it stops.
÷ If you want to stop IntroScan while
it’s in progress, just press ENTER
key on the remote (the current track
starts playing in its entirety).
Using the On-screen banner display
÷ The menu is switched off when no operation is
performed for about 5 seconds.
÷ The menu is switched off when no operation is
performed for about 5 seconds.
ON SCREEN
MULTI CONTROL
ON SCREEN
MULTI CONTROL
ENTER ENTER
ANGLE
Note Note
P.B.C. on mode of VCD, the IntroScan function may
not work.