Kathrein Euroline UFE 370/S - Manual (Page 25)

Installation Menu
25
Time Settings
The time and date must be programmed to enable the receiver to
display the correct information in information messages and for
operation of the timer (as well as on the front panel in Standby
mode).
The internal clock is set as follows:
a) Apply the broadcast time (default). In this case the time
difference between GMT and the location (in Germany + 2
hours in Summer, + 1 hour in Winter) must be allowed for.
b) If you select «Off» in the first field, you will need to enter the
time and date manually using the number pad.
Note: It may be that some channels do not transmit the correct GMT time.
In this case the receiver will display an incorrect time. To display the
previous time, tune in to a different European channel and wait a few
minutes for the receiver to display the correct time again.