Konica Minolta Pi2001e - Manual (Page 12)

Getting Ready 2
Pi1803e/Pi2001e 2-1
2 Getting Ready
2.1 System Requirements
The following operating environment is required in order to use the printer
driver.
*1: Point and print is possible with printers shared by Windows servers and clients. (Windows
2000 and NT 4.0 only) Clients inherit the driver settings from the server, such as the device
options, watermark, and Easy set setup, and are unable to modify the server settings if the user
does not have administrator access of the server.
*2: Supported by Windows XP, Windows 2000, Windows Me, Windows 98SE, and Windows
98.
*3: If the optional network interface card is installed, the network port can be used. For details,
refer to the User Manual for the Network Interface Card (NC-6).
CPU Intel Pentium 200MHz
Operating system Windows XP (SP1 or later)/Windows 2000 (SP4 or later)/
Windows NT 4.0 (SP6a or later)/Windows Me/Windows 98SE/
Windows 98/Windows 95(OSR2.5 with Internet Explorer 4.0 or
above)
Point &
Print*1 Domain Server: Windows 2000 Server Client: Windows 2000
Professional, Windows NT
4.0 Workstation
Server: Windows NT 4.0
Server Client: Windows NT 4.0
Workstation
Workgroup Server: Windows 2000
Professional Client: Windows 2000
Professional, Windows NT
4.0 Workstation
Server: Windows NT 4.0
Workstation Client: Windows NT 4.0
Workstation
RAM 128 MB (Windows XP), 64 MB (Windows 2000/NT 4.0/Me/
98SE/98/95)
I/O interface Parallel IEEE 1284 (compatible mode, ECP mode, Nibble mode)
USB*2 Revision 1.1 port
Network*3 Ethernet 10Base-T/100Base-TX (TCP/IP, IPX/SPX)
CD-ROM drive