Kenwood KDC-5020 - Manual (Page 35)

— 35 — — 35 —
Connecting Wires to Terminals (KDC-5020R)
TEL MUTE
P.CONT
ANT.CONT.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
FRONT
REAR
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Rear Right ( + )
Rear Right ( – )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
Battery wire (Yellow) 6
Ignition wire (Red) 7
A–7 Pin (Red) 8
A–4 Pin (Yellow) 9
Connector B
Connector A
4 Rear right output (Red)
10 Rear left output (White)
12 Front left output (White)
5 Front right output (Red)
KENWOOD disc changer input 14
FM/AM antenna input 3
Antenna Cord (ISO) 1
Antenna Conversion Adaptor (ISO–JASO) (Accessory6) 2
To connect the Disc changer, consult your
Disc changer manual.
15
Wiring harness
(Accessory1)
16
If no connections are made, do not let the wire
come out from the tab.
18
Power control/ Motor antenna
control wire (Blue/White)
20
17
TEL mute wire (Brown)
Connect either to the power control
terminal when using the optional
power amplifier, or to the antenna
control terminal in the vehicle.
23
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
21
Fuse (10A) 13