beautypg.com

Menu system, English – Kenwood KDC-5020 User Manual

Page 28

background image

Function of the KDC-MPV7020/KDC-6020/KDC-5020

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.

CRSC (Clean Reception System Circuit)

Function of the KDC-MPV7020/KDC-6020/KDC-5020R

For the operation method refer to (page
14/ 19).

Auto Memory Entry

Function of the KDC-5020R

Sets the tuning mode.

Tuning mode

Display

Operation

Auto seek

"AUTO 1"

Automatic search for a station.

Preset station seek

"AUTO 2"

Search in order of the stations
in the Preset memory.

Manual

"MANUAL" Normal manual tuning control.

Tuning Mode

Function of the KDC-5020R

Only stations whose reception is good are searched for in auto
seek tuning.

Display

Setting

"LO.S OFF"

The local seek function is OFF.

"LO.S ON"

The local seek function is ON.

Local Seek

Function of the KDC-5020R

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.

Display and Setting

"NEWS OFF"
"NEWS 00M"

"NEWS 90M"

When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.

• If you choose the "20M" setting, further news bulletins will not be

received for 20 minutes once the first news bulletin is received.

• The news bulletin volume is the same level that was set for traffic

information (page 15).

• This function is only available if the desired station sends PTY-code

for news bulletin or belongs to -
Network sending PTY-code for news bulletin.

• When the News Bulletin Interrupt function is ON, it switches to an

FM station.

News Bulletin with Timeout Setting

Function of the KDC-MPV7020/KDC-6020

Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)

Display

Setting

"SWPRE R"

Rear preout.

"SWPRE NF"

Non-fading preout.

Switching preout

Menu system

— 28 —

English

This manual is related to the following products: