Kenwood DDX7015 - Manual (Page 31)

Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
Displaying the Car Type Set Up
screen
If your vehicle type is selected, the Digital Time
Alignment is set automatically (for timing adjustment of
sound output for each channel) to have the highest
surround effects.
Car Type Set Up screen
Au d i o S e t U p
7 Displays the X'over (HPF) screen.
(See , page 64)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
8 Display the X'over (LPF) screen.
(See , page 64)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
9 Sets up the front speaker type to fine-tune for the
optimal equalizer curves.
Standard: Setup for general diameter speakers
Narrow:
Setup for small diameter speakers
Middle: Setup for small diameter woofer
Wide: Setup for large diameter woofer
p Select the speakers for Multi-channel sounds.
"3/2": Center speaker, Front speaker, Rear speaker
"2/2": Front speaker, Rear speaker
"3/0": Center speaker, Front speaker
"2/0": Front speaker
q Set the use or no use of Sub Woofer.
w Displays the Channel Level Setup screen.
e Displays the Car Type Set Up screen.
r Selects a speaker to be set.
(see , page 62)
t Sets the speaker volume.
(see , page 62)
y Starts or stops test signal tone output for setup
check.
u Displays the Speaker Set Up screen.
• Your setup on the is
adjusted automatically to get the best sound
effects according to the car type and speaker you
have set on the (see page 60).
We recommend you to complete the Up> first, then set up the Menu>.
You can fine-adjust the automatic set value by
(see page 62), Network Setup> (see page 59), or Equalizer> (see page 88).
• Stop the test signal tone if you have finished
setting up the Channel Level. If you leave the test
signal tone on, you may not be able to set up
other settings.
Setup Menu
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (see page 84)
3 Calls the Setup Menu.
4 Sets up the car type you use together with this unit.
5 Displays the DTA (Digital Time Alignmnet) Setup
screen. (see page 64)
You can adjust the digital time alignment that was
set automatically when you selected the car type.
6 Displays the Speaker Set Up screen.
You cannot set up "Car Type" when "Position
Setting" (see page 90) is "All".
M e n u D TA
C a r Ty p e
C a r Ty p e
Sma l l
Set Up
SRC
Audio
1
4 4
5
6 6
3
2
+ 1 0 dB
Ce n t e r
M e n u
C h a n n e l L e v e l
T e s t
Set Up
SRC
Audio
16
17
English
English 61 60 English
Audio Set Up
(with the optional accessory DSP unit connected only)
You can set up more detailed settings by connecting the optional accessory DSP unit.
X ' Ov e r HPF
X ' Ov e r LPF
S u b Woo f e r O f f
S t a n d a r d
F r o n t L&R
3 / 2
M u l t i C h a n n e l
M e n u
Sp e a k e r
Set Up
SRC
Audio
9 9
11
10 10
12 13
14
15 15
8
7