Kalorik USK SIT 25803 - Manual (Page 18)

18 USK SIT 25803 - 080425
allow proper time
for the unit
to heat up and
begin
producing
steam)
Steam button is
not
being
pressed
Press and hold the steam
button for a few seconds
for steam to begin flowing
Steam output
power is reduced
or intermittent.
Steam jet holes
have
mineral
build up
blocking the
steam.
Use “self clean” function
cleaning for 3 minutes.
Loud pumping
sound when steam
button is pressed.
Low water
level in water
reservoir.
Refill water reservoir
according to filling
procedure
1. Used
incorrect water
type.
1. Immediately empty all
water from the reservoir
and
refill using clean
water. Perform “self clean”
function
to clear the
system and steam jet holes
of dirty water and mineral
build up.
2. Have not
routinely
performed the
“self-clean”
function.
2. Use “self clean” function
cleaning for 3 minutes.
Dirt/ mineral build
up coming out of
steam holes.
3. Have not
changed the
filter cartridge
at
suggested
interval as
shown in
manual.
3. Change filter cartridge
as
per instructions in
maintenance section.
Water level
indicator light
illuminates.
Reservoir is low
on water. Refill reservoir according to
filling procedure.