Kenwood Excelon DDX812 - Manual (Page 80)

80 DNX8120/DDX812/DDX8032BT
o Selects a screen mode of the TV screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
; Returns to the "Mode Select 1" screen.
a Selects a screen mode of the rear view
camera (R-CAM) screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
s Returns to the "SETUP Menu" screen.
⁄
• When you select the Menu or Navigation, the display is
shown in the full-size display mode automatically. The
screen mode of these displays cannot be changed.
• The picture qua¡lity can be set for each source.
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
Security Code Setup
You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
1 Display the Security Code Setup screen
Touch in the "SETUP
Menu" screen (page 64).
1
2
3
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
(
"On")
3 Returns to the original screen.
2 Start Security Code setup
⁄
• If you have already completed the code registration,
Clear is displayed.
3 Enter a security Code
Input four-digit number.
Setup Menu