Kenwood Excelon DDX812 - Manual (Page 68)

68 DNX8120/DDX812/DDX8032BT
Setup Menu
Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
3
5
6
2 2
3
4
1
1 Sets the High Pass Filter of the center
speaker.
2 Sets the High Pass Filter of the front speaker.
3 Sets the High Pass Filter of the rear speaker.
4 Sets the Low Pass Filter of the sub woofer.
5 Switches to the crossover setup screen.
6 Returns to the "SETUP Menu" screen.
2 Display the Crossover setup screen
3 Set the crossover
7
8
10 9
7 Sets the crossover frequency.
When center speaker, front speaker or rear
speaker is selected in step 1:
High Pass Filter adjustment
When Subwoofer is selected in step 1 :
Low Pass Filter adjustment
8 Sets a crossover slope.
9 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set
to "Reverse".
p Returns to the "Audio SETUP" screen.
⁄
• When you select a speaker type on the Speaker Set Up
screen, the crossover frequency setup is cleared.
• During crossover setup, the speaker type is set to "User"
on the Speaker Set Up screen.