Karcher G 2000 MK - Manual (Page 6)

6
English
Î STEP 1:
Attach the handle to the frame of the
pressure washer. Align holes, insert
bolts, and tighten with knobs.
Î STEP 2:
Mount the gun/hose storage hanger.
Î STEP 3:
Attach the high pressure hose to the
spray gun.
Î STEP 4:
Attach the wand to the spray gun.
Please follow the instructions step-by-step.
Failure to follow the instructions explicitly
could lead to premature failure of the en-
gine.
ƽ
CAUTION
Engine shipped without oil. Before starting
engine, fill with oil. Do not over-fill. Do not
run the engine with a high or low oil level as
this can cause engine damage.
Î
STEP 1:
Add the oil (1 bottle of SAE 15W 40SF/
SJ) supplied wiht your pressure washer
to the engine crankcase only. Failure to
add engine oil will cause engine failure.
This type of failure is not covered by the
manufacturer’s warranty.
Oil amount should not exceed 10 oz /
300ml.
Below indicates the optimal levels when
adding or checking oil.
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS