Konica Minolta Vectis 300l - Manual (Page 33)

64 65
REMOTE CONTROL (Sold Separately)
3. Lift your finger from the shutter-
release button, then recompose the
picture.
4. Point the remote toward the front of the camera and press • or
2s.
• The green ready lamp keeps glowing and the focus will remain locked after
taking a picture.
• Reset the remote-control mode or press the zoom button to cancel focus
hold.
2. Center your subject in the focus
frame, then press the shutter-release
button partway down so the green
ready lamp glows.
• Focus is locked.
• Focus will be reset if you press the shutter-
release button partway down again.
1. Set the camera to remote control mode.
FOCUS HOLD IN REMOTE CONTROL MODE
Continued on following page.