Konica Minolta Vectis 300l - Manual (Page 25)

48 49
DATE IMPRINTING - Setting the date and time
1. Press the main switch to turn the camera
off.
This camera has a quartz clock and automatic
calendar through the year 2029.
6. Press the select button until all items
stop blinking to set the updated
information.
• The data panel shows the date display for five
seconds, then all the indicators will disappear.
4. Press the adjust button to change the
blinking item.
• Press and hold the adjust button to change the
value rapidly.
2. Press the date button.
• The date display will appear in the data panel.
3. Press the select button until the item you
want to adjust blinks.
• Each press of the select button causes the next
item to blink. The seuqence is:
Year - Month - Day - Hour - Minute
5. Repeat steps 2 and 3 until all items in
the date and time display are correct.