Kodak I5000 - Manual (Page 2)

IMPORTANT:
‰ The Roller Cleaning Pad contains sodium lauryl ether
sulfate which can cause eye irritation. Refer to the
MSDS for more information.
‰ Staticide Wipes contain isopropanol which can cause
eye irritation and dry skin. Wash your hands with soap
and water after performing maintenance procedures.
Refer to the Material Safety Data Sheet (MSDS) for
more information (www.kodak.com/go/MSDS).
Cleaning Frequency Chart
Procedure
Start of
day
Middle
of Shift
Start of
new
shift
1
Vacuum output tray and
input areas (input
elevator and transport) x
2
Clean all rollers;
including feed module
x x
3
Run transport cleaning
sheet
x x
4 Clean imaging guides x x x
Cleaning the transport and rollers
Running a cleaning sheet and cleaning
the imaging guides
For detailed cleaning and replacement procedures see Chapter 5, Maintenance in the User’s Guide.