Kenwood TM-271 - Manual (Page 65)

59
11
3 Press [MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
MICROPHONE PF KEYS (K
EYPAD
M
ODELS
O
NLY
)
You can access many transceiver settings without using
transceiver keys or controls. Microphone keys PF/D,
MR/C, VFO/B, and CALL/A are programmable with
transceiver functions.
The microphone key default assignments are as follows:
Mic PF1 key [PF/D]: 1 MHz step
Mic PF2 key [MR/C]: Memory Recall
Mic PF3 key [VFO/B]: VFO Select
Mic PF4 key [CALL/A]: Call Channel Select
Note:
◆ Turn the transceiver OFF before connecting the microphone.
◆ Menu No. 34 (MCL) must be configured to “OFF” in order to
program the microphone keys.
1 Press [F], [MENU] and turn the Tuning control to
select one of Menu No. 35 to Menu No. 38
(PF1 ~ PF4).
2 Press [MENU] and turn the Tuning control to select
the programmable function from the list provided
below.
3 Press [MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
Programmable Functions
• MONI: Monitor function ON/OFF
• ENTER: Used to enter a frequency or memory channel
number with the keypad
• 1750: Transmit 1750 Hz
• VFO: Enter VFO Mode
• MR: Enter MR Mode
• CALL: Select the Call Channel
• MHZ: Enter 1 MHz Step Mode
• REV: Reverse function ON/OFF (momentary press) and
Auto Simplex Checker function ON/OFF (must be held
down for 1 second to activate)
• SQL: Enter Squelch Mode
• M--V: Memory to VFO transfer
• M.IN: Store a Memory Channel
• C.IN: Store the Call Channel
• MENU: Enter Menu Mode