beautypg.com

Troubleshooting guide – Kenwood B64-2106-00 KRC-16 User Manual

Page 27

background image

— 27 —

Troubleshooting Guide

The messages shown below display your systems
condition.

EJECT:

No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.

E01

Load the disc magazine properly.

NO DISC:

No disc has been loaded in the disc magazine.

E02

Load a disc into the disc magazine.

E-04:

No disc has been loaded in the disc magazine.

E04

Load a disc into the disc magazine.

The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.

Clean the CD and load it correctly.

BLANK:

Nothing has been recorded on the MD.

E10

NO TRACK:

No tracks are recorded on the MD, although it has a
title.

E11

NO PANEL:

The faceplate of the slave unit being connected to
this unit has been removed.

E30

Replace it.

E-77:

The unit is malfunctioning for some reason.

E77

Press the reset button on the unit. If the "E- 77"
code does not disappear, consult your nearest
service center.

E-99:

The unit is malfunctioning for some reason.

E99A

Press the reset button on the unit. If the "E-99"
code does not disappear, consult your nearest
service center.

HOLD:

The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.

E0d

Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.

NO NAME:

Attempted to display DNPS during the CD play having
no disc names preset.

E51

NO TITLE:

Attempted to display the disc title or track title while
the MD having no MD title is being played.

E53

NO TEXT:

Attempted to display the disc text or track text while
the CD having no CD text is being played.

E54

LOAD:

Discs are being exchanged in the Disc changer.

E57

2 3 (Blink): The tape player section is not operating properly.

E60

Reinsert the Tape. If the tape cannot be ejected or
the display continues to flash even when the tape
has been properly reinserted, please switch off the
power and consult your nearest service center.

KRC-291(E)_U.S_r3 01.10.2 4:47 PM Page 27

This manual is related to the following products: